In this guide to Hours of Service (HOS) for trucking, you will find a basic introduction to Hours of Service rules in the United States, an overview of HOS rulesets and driving limits, and a glossary of important terms.
Hours of Service Overview
What Is Hours of Service (HOS)?
Hours of Service (HOS) regulations help ensure overall road safety by governing the number of hours that truck drivers can drive and work. In general, HOS rules regulate the maximum number of hours that can be driven, specify mandatory break times and off times, and duty cycles.
You can find the complete the complete regulations in Part 395 Hours of Service of Drivers of the Federal Motor Carrier Safety Regulations. The Hours of Service of Drivers Final Rule was published in December 2011. The Federal Motor Carrier Service Administration oversees (but is not limited to) all interstate regulations and mandates any changes needed.
Many countries around the world have their own HOS regulations, such as Australia, Brazil, and Canada. This article will focus on driving requirements in the United States, giving a general overview of how HOS is managed and regulated.
Geotab Drive compliance graph showing duty status for 24-hour period.
Who Is Subject to Hours of Service Regulations?
HOS regulations apply to drivers who operate a commercial motor vehicle (CMV) in the United States, no matter whether they are from the United States or an international motor carrier from Canada or Mexico. A CMV is defined as a vehicle (with or without a trailer) which satisfies any of the following conditions:
- Weighs (including any load) 10,001 lbs (4,536 kg) or more, or
- Has a gross vehicle weight rating or gross combination weight rating of 10,001 lbs (4,536 kg) or more, or
- Transports hazardous materials in a quantity requiring placards
- Made intentionally or used to transport 16 or more passengers, including the driver, without compensation
- Made intentionally or used to transport 9 or more passengers, including the driver, for compensation
See Also: Quick Guide to the FMCSA’s ELD Mandate
Where Do Hours of Service Regulations Apply?
Hours of Service Regulations are found across the world. In the USA there are two different sets of regulatory provisions for Hours of Service: Interstate and Intrastate. A common misconception is that interstate commerce refers to vehicles themselves or the driver crossing state borders, but this is not the case.
Interstate commerce refers strictly to the transfer of goods, services and passengers across state borders. Drivers who are not involved in interstate commerce at all times must continue to comply with FMCSA HOS regulations for at least 7 or 8 days after they stop performing interstate commerce, depending on what exact ruleset they operate under.
Intrastate commerce refers to the transfer of goods, services and passengers that stay within the borders of one state. If you are operating in intrastate commerce only, the federal HOS regulations do not apply to you. However, each state creates their own HOS regulations for intrastate commerce drivers, such as the Texas Transportation Code for Texas intrastate drivers.
Vehicles transporting hazardous material in large quantities, even during times in which they are not carrying any load must comply with FMCSA HOS regulations not intrastate regulations.
How Many Hours Are You Allowed to Drive in a Day?
Before explaining the limits, it’s important to note that there are different Hours of Service rules depending on whether you are a property or passenger-carrying driver.
Property-Carrying and Passenger Carrying Drivers
A property carrier is a company that transports goods or services, such as one that delivers packaged food or a moving company. A passenger carrier transports people, such as a city or tour bus. Both property and passenger carriers have various sets of rules they must adhere to, otherwise known as a ruleset. These rulesets have different exemptions as well.
Driving Limits Overview (Property-Carrying)
Under the property-carrying ruleset, truck drivers must follow several important limits:
- 14-Hour “driving window”
- 11-Hour driving limit
- 60-hour/7-day and 70-hour/8-day limits
In the following section, we’ll explain each of these rules in further detail.
14-Hour Workday Limit (Property Carrying Vehicles)
The 14-Hour limit means that once a driver comes back ON-Duty after 10 consecutive drivers of OFF-Duty time, that driver cannot drive beyond 14 consecutive hours.
This workday limit is the total number of hours a driver can work in a day and is designed to prevent driver fatigue. It consists of driving, rest limits, and various OFF-Duty breaks (i.e. getting lunch, mandatory rest limit, etc.). This 14 consecutive hour driving window does not change even if the driver goes OFF-Duty to take a break or nap.
If a driver drives 8 hours, takes a 1-hour OFF-Duty time for lunch, then drives for 2 hours followed by an additional 3 hours of OFF-Duty time, that driver has hit their 14-Hour limit despite not reaching an 11-Hour driving limit.
Note on Passenger-Carrying Duty Limit:
For passenger-carrying vehicles, a 15-hour duty limit applies, instead of a workday limit. Duty Limit is non-consecutive, meaning that any time spent in OFF-Duty or the Sleeper-Berth does not count towards the limit. The 15-Hour duty limit is used for passenger carriers and some intrastate property carriers to help the driver accomplish more non-driving related tasks in the day. It also accommodates long breaks in between picking up and dropping off cargo.
11-Hour Driving Limit
Within the 14-Hour workday, property-carrying drivers are only permitted to drive their truck for a maximum of 11 hours after 10 consecutive hours of OFF-Duty time. This means they cannot drive for more than 11 hours in a day without a long break of OFF-Duty time.
60/70-Hour Limit and the 34-Hour Restart
The 60/70-Hour limit governs how many hours a truck driver can work in a week. This limit is based on a rolling 7-day or 8-day period. In other words, drivers have a limited number of hours they can be ON-Duty per cycle (week). Drivers cannot drive after they have reached 60/70 hours of ON-Duty time in 7/8 consecutive days.
The 60/70-hour limits will reset after you have taken 34 hours of consecutive off duty status.
A driver can be ON-Duty a maximum 60 hours in a 7 day cycle. In order to reset the cycle, drivers must take a consecutive 34 hours of OFF-Duty. This can be done at any time as long as the hours do not exceed 60 hours.
Consecutive OFF-Duty Time
Once a driver has worked a total of 60 hours in the past 7 days, they have hit their limit. They must be OFF-Duty for a consecutive 34 hours in order to work again. This is also referred to as the 34-hour reset or 34-hour restart.
Drivers must have a certain number of non-working/off hours within a 24-hour time period to give them a rest from driving and other miscellaneous tasks. Drivers can do their OFF-duty time in the sleeper berth, in a hotel, at home, or other areas outside of actual work. The driver is considered OFF-Duty as soon as they are no longer in transit with the goods, services or passengers. They can drive while OFF-Duty, but not for any work-related tasks such as fueling the vehicle or taking it to the mechanic.
Previously, an extra restriction for the 34-hour restart had been considered, requiring two OFF-Duty periods of 1 a.m. to 5 a.m. and a once per week provision. However, based on a Department of Transportation (DOT) study of truckers conducted by the FMCSA and Virginia Tech which showed that the changes did not benefit driver safety, the requirements were struck down.
The Sleeper Berth refers to the cab in the back of the truck which can contain a bed, desk, TV, and fridge. Drivers can use the time spent in the sleep-berth to count towards their mandatory rest-limits or their OFF-Duty time. If drivers have a 10-hour OFF-Duty time, they can spend the full 10 hours in the sleeper-berth or they can do 8 hours of OFF-Duty, followed by some driving then 2-hours of OFF-Duty time which would count towards their total OFF-Duty time.
Rest time is the required break for a CMV driver after a certain number of hours worked. For example, if a property-carrying driver drives 8 continuous hours, he or she is required to take a 30-minute break.
This is not something that is optional for the drivers, rather this is a mandatory break they must take. Breaks can be logged as either OFF-Duty time or can be taken as time in the sleeper-berth (SB), at the side of the road, truck stop, restaurant, or other rest area.
Who Is Exempt from Hours of Service?
There are many different exemptions and exceptions that extend or change the following categories above. For a summary of some of the most common exemptions for Hours of Service, please see below.
List of Common HOS Exemptions
16-Hour Rule: Allows drivers to add 2 hours onto their 14 hour workday within certain conditions.
Adverse Driving Conditions: Lengthens the driving limit / ON-Duty limit by up to 2 hours due to unforeseen driving conditions. Adverse driving conditions covered include snow, fog or unexpected traffic shut-down, but do not cover more common occurrences such as traffic congestion in rush hour.
When Hurricane Harvey hit the Gulf Coast in 2017, the FMCSA issued a Regional Declaration of Emergency for Texas and Louisiana and gave drivers an exemption for Parts 390-399 of the Federal Motor Carrier Safety Regulations to allow fast response in delivering relief supplies and transporting people. See our Hurricane Harvey timelapseshowing the dramatic impact on fleets activity as reported by Geotab GO devices.
Oil Transport: Allows drivers in the oil transportation industry to restart their cumulative work week after 24 consecutive hours of OFF-Duty Time.
Salesperson: Drivers, who are also salespersons, do not have to comply with the 60-hour/7-day limit or the 70-hour/8-day limit.
Short-Haul: Drivers of “short-haul” vehicles do not need to take a half-hour rest break after 8 hours of ON-Duty.
Wait-At-Well: Drivers in oil-well transportation service can use time spent waiting at oil well site as OFF-Duty time or to satisfy the 30-minute break.
Records of Duty Status (RODs)
In order to prove that the driver has followed the regulations, drivers must present roadside inspection officers with documented logs, also known as a record of duty status (RODs). The requirements for a driver’s record of duty status are detailed in 49 CFR 395.8.
RODs logs must include:
- 24-hour period grid
- Date (Day, Month, Year)
- Total miles driven
- Truck/Tractor/Trailer number
- Name of carrier
- Main office address
- Driver’s certification verifying logs
- Name of co-driver
- Time zone
- Total hours spent in: OFF-Duty, ON-Duty, Sleeper Berth, Driving
- Shipping document number/name of shipper/name of commodity
Annotations are used within logs and give a description of what happened, whether it be a duty status change or forgetting to apply an exemption. This allows the driver to inform the officer and the fleet manager, upon request, of their where abouts at a certain time. Annotations can be as simple as “Taking lunch” or they can be more detailed, as decided by the carrier.
It is important to note that RODs belong to the individual driver, not the vehicle or the motor carrier. If the driver changes vehicles, their RODs logs will stay with them and unchanged. In cases of co-drivers or team-drivers (where there are multiple drivers in the same vehicle) each driver must have their own RODS logs. Drivers must ensure that their logs are clear and accurate as possible so they can be easily reviewed during an inspection if necessary.
Submitting Logs to Roadside Inspectors
The ELD rule requires drivers to use either an electronic logging device (ELD) or an automatic on board recording device (AOBRD) for records of duty status (RODS). Paper logbooks will no longer be allowed for drivers subject to the rule. Once the rule comes into full effect on December 19, 2019, only self-certified ELDs can be used.
In the event of a roadside inspection, drivers must have their RODs readily available. All RODs must be compliant with their ruleset, or else the driver will be subject to fines.
How to Record Hours of Service with an ELD
Historically, drivers have used paper logs to record their Hours of Service. However, with the introduction of the ELD Mandate in the United States, drivers and carriers are required to use electronic logging devices for record-keeping.
Geotab Cloud ELD is a fleet compliance management solution for monitoring and recording Hours of Service, including Records of Duty Status (RODS) and Driver Vehicle Inspection Reports (DVIR).
Drivers log their Hours of Service from the Geotab Drive mobile app which can be used on a smartphone or tablet. In the Geotab Drive HOS screen, drivers can select and change their duty status. They can also see a summary of the time remaining in each duty status, e.g. Rest in, Driving left, Workday left, and Cycle left.
A blue bar near the top of the screen shows the time left driving, and will turn red if the driver goes into violation. Geotab Drive has automatic duty status changes, meaning that when the truck is in motion, the duty status will change to D (Drive).
Read more about Geotab Cloud ELD here.
By December 18, 2017, all carriers must implement AOBRD or Electronic Logging Devices (ELD) to track HOS. For more information on ELD mandate, electronic logs and hours of service compliance, please go to www.geotab.com/eld
Hours of Service Glossary
Important Trucking Acronyms
AOBRD: Automatic On Board Recording Device
CMV: Commercial Motor Vehicle
DOT: Department of Transportation
DVIR: Driver Vehicle Inspection Reports
ELD: Electronic Logging Device
FMCSA: Federal Motor Carrier Safety Administration
HOS: Hours of Service
RODs: Records of Duty Status
Duty Status Categories
D (Drive): Time spent operating the CMV.
OFF (OFF-Duty): Time that the driver is relieved of all duty and responsibility for performing work. To be considered OFF-Duty time, drivers must be free to pursue activities of their choice and leave the place where their vehicle is parked.
ON (ON-Duty): All the time that the drivers spends working and being compensated.
SB (Sleeper Berth): Similar to OFF-Duty.
Additional HOS Terms
34-Hour Restart: The driver must be OFF-Duty for a consecutive 34 hours before starting work again.
DOT Officer: Officer that is hired by a Department of Transportation (DOT) to enforce set regulations
Drive’s Logs: Analogous with Record of Duty Status Logs
Drive Status: Time spent driving the vehicle.
ELD (Electronic Logging Device): Technology that automatically records a driver’s driving time and other aspects of the Hours of Service (HOS) records. For a more detailed description, see: What Is an ELD?
Fine: Violations of hours of service rules can result in fines or other penalties such as being placed out of service or a reduction in the driver or carrier’s safety rating, depending on the severity of the violation. When a driver is in violation of HOS regulations they must pay a fine and stop driving until they are no longer in violation.
FMCSA: Federal Motor Carrier Service Administration is an agency of the United States Federal Department of Transportation. They regulate all interstate CMV’s and international CMV’s.
Hazmat (Hazardous Material): Any materials deemed hazardous by the FMCSA, such as compressed gasses or spontaneously combustible material, require a placard on the truck and special training for transporting (as per the FMCSA regulations).
Hours of Service: Safety regulations which oversee the time spent ; driving, on-duty, off-duty, and resting of commercial motor vehicle drivers.
Inspection: Carried out by a DOT officer to ensure that the driver did not violate HOS regulations and other various factors of the trucking industry
Interstate Commerce: The transfer of goods, services and passengers across state borders.
Intrastate Commerce: The transfer of goods, services and passengers that stay within the borders of one state.
Logbook: Form which tracks the Hours of Service statuses of a driver for 24-hours
Motor Carrier: Company or person supplying transportation of property or passengers via CMVs.
OFF-Duty Status: Leisure time or rest time for a driver
ON-Duty Status: When a driver is doing tasks that would otherwise be known as work, that is not driving
Team Drivers (Co-drivers): Two or more drivers that alternate between passenger and driver seat of a vehicle. Typically used for time sensitive deliveries, like moving trucks.
For the complete and updated Hours of Service regulations, please go to the FMCSA website.
We hope we clarified some things and gave you a much deeper level of HOS regulations in the United States. If you have any questions don’t hesitate to ask us in the comment section below. Thanks for your visit and come again soon!